Cathy The Great

Electrician Tips in Installing Accent Lights and Chandeliers

The post Electrician’s Advice in Installing emergency lights appeared first on GforceElectric.

This first appeared on Linda Song's Tumblr

Electrician’s Advice in Installing emergency lights

The importance of emergency lights

Emergency lights are important in commercial properties. (Photo Credits)

"When mounting an emergency light, it is important to consult an electrician if you are unfamiliar with the proper safety procedures. An emergency light will be connected to the electrical wiring of a building or residence, so that it can sense when the power goes out. In the event of an outage, or the tripping of a breaker, the unit will be signaled to come on and have ninety minutes of backup power to illuminate the path to an exit."

Read the continuation here.

Emergency lighting safety

"An important part of all inspections is to make sure the heads have not moved and are aimed accurately. These emergency lights are simple to repair, and it is rarely necessary to purchase a whole new unit. Typically, when you push the test button and all lights fail to go on or are weak, it's a sign new batteries are needed — but not always."

The rest of the article can be found here.

Related Electrical Repair and Installation Service

Locate a Poway Electrician Emergency Electrician
Find a Escondido Electrician More Info
Emergency Electrician Chula Vista 24/7 Contact
Gforce Mira Mesa Electrician Services Check Here
GforceElectrician Santee Free Estimate

Firepros.com also shared some tips on installing emergency evacuation lights. One of the tips they discussed in their write-up is to adhere to fire standards.

"Guidelines for emergency lighting were created to improve visual conditions in the event of a fire or other emergency. If you own a commercial building, you must follow fire codes and standards. A fire protection contractor will be able to help you install lighted exit signs that improve the safety of your building. Fire codes and standards outline how long exit lights have to stay on during an emergency."

Check out the rest of the write-up here.

Emergency lights are indeed very helpful during crises situations.

Gforce Green Electric Solutions

2920 McGraw St San Diego, CA 92117

(858) 480-6559

Gforce Electric Repair San Diego

Electrician Tips in Installing Accent Lights and Chandeliers

The post Electrician's Advice in Installing emergency lights appeared first on GforceElectric.

Saturday, December 15, 2018

Electrician Tips in Installing Accent Lights and Chandeliers

Safe installation

Chandeliers should be installed by a professional to ensure its safety. (Photo Credits)

Installing chandeliers can be very tricky especially for a homeowner trying to install one on his own. For one, there is safety involved, and of course there is the risk of damage and losses in case the expensive chandelier drops on the floor and gets damaged.

But for homeowners who would like to try their hand in hanging their own chandeliers, Home improvement website The Spruce has come up with tips on hanging chandeliers both for safety and over-all and design and impact in a room.

“Depending on where you’re placing your chandelier, there are some guidelines you can follow. When hanging a chandelier above a dining room table, experts generally agree that it should hang 30 to 36 inches above your table. The rule is simple—the taller the ceiling, the taller the chandelier, and chains can always be extended or shortened if needed. For an entryway, the majority of pros assert that the chandelier should hang no lower than 7 feet.”

Check out the rest of their tips here.

Cove lighting

As for other home lighting accents like cove lighting, Family Handyman came up with a step-by-step procedure on installing cove lighting. Foremost in their tips though is to ensure that cove lighting is right in relation to a home design and structure. Then they came up with a comprehensive list of instructions on installing cove lighting. Electricians

“Draw reference lines to indicate the bottom of the light strip and the bottom of the base. Don’t worry whether the lines are level. Instead, measure down from the ceiling in several places and connect the dots to achieve a consistent distance between the cove and the ceiling. Years of settling can throw a ceiling out of level. A cove not in line with the ceiling will create a noticeably uneven gap. Save time by cutting a couple blocks of wood to use as marking gauges.”

Read the rest of the instructions here.

Related Electrical Repair and Installation Service:

Residential Electrical Services Free Estimate
GforceElectric Solar Program More Info
GforceElectrician San Marcos CA Click here
GforceElectrician Vista CA Contractor Free Safety Check \
GforceElectrician Encinitas CA Contractor Emergency Electrician
GforceElectrician Santee Free Estimate

Pendant lights are yet another trend in home lighting design. The DIY Network came up with a comprehensive web post explaining how this could be done by homeowners, and what safety considerations to keep in mind when doing such. Builders and Contractors

“Before beginning any type of electrical project, be sure the power is turned off at the home’s main circuit box. Cover the switch with tape to make sure it doesn’t get turned back on while you are working. Use a circuit tester to ensure that the power is off before you touch any of the electrical wiring.”

The list of the step by step instructions can be found here.

If unsure as to how to safely install accent lighting, chandeliers, or pendant lights, the safest route will always to heed the service of a licensed professional electrician contractor.

Gforce Green Electric Solutions

2920 McGraw St San Diego, CA 92117

(858) 480-6559

Electrician’s Tips on Safe Ceiling Fan Installation

The post Electrician Tips in Installing Accent Lights and Chandeliers appeared first on GforceElectric.

This first appeared on Linda Song's Tumblr

Electrician Tips in Installing Accent Lights and Chandeliers

Safe installation

Chandeliers should be installed by a professional to ensure its safety. (Photo Credits)

"Depending on where you're placing your chandelier, there are some guidelines you can follow. When hanging a chandelier above a dining room table, experts generally agree that it should hang 30 to 36 inches above your table. The rule is simple—the taller the ceiling, the taller the chandelier, and chains can always be extended or shortened if needed. For an entryway, the majority of pros assert that the chandelier should hang no lower than 7 feet."

Check out the rest of their tips here.

Cove lighting

"Draw reference lines to indicate the bottom of the light strip and the bottom of the base. Don't worry whether the lines are level. Instead, measure down from the ceiling in several places and connect the dots to achieve a consistent distance between the cove and the ceiling. Years of settling can throw a ceiling out of level. A cove not in line with the ceiling will create a noticeably uneven gap. Save time by cutting a couple blocks of wood to use as marking gauges."

Read the rest of the instructions here.

Related Electrical Repair and Installation Service:

Residential Electrical Services Free Estimate
GforceElectric Solar Program More Info
GforceElectrician San Marcos CA Click here
GforceElectrician Vista CA Contractor Free Safety Check \
GforceElectrician Encinitas CA Contractor Emergency Electrician
GforceElectrician Santee Free Estimate

"Before beginning any type of electrical project, be sure the power is turned off at the home's main circuit box. Cover the switch with tape to make sure it doesn't get turned back on while you are working. Use a circuit tester to ensure that the power is off before you touch any of the electrical wiring."

The list of the step by step instructions can be found here.

If unsure as to how to safely install accent lighting, chandeliers, or pendant lights, the safest route will always to heed the service of a licensed professional electrician contractor.

Gforce Green Electric Solutions

2920 McGraw St San Diego, CA 92117

(858) 480-6559

Gforce Electric Repair San Diego

Electrician's Tips on Safe Ceiling Fan Installation

The post Electrician Tips in Installing Accent Lights and Chandeliers appeared first on GforceElectric.

Monday, October 22, 2018

Electrician’s take on Plug Adapters

The Dangers of Plug Adapters

All about using Plug Adapters. (Photo Credits)

Plug adapters may be helpful around the home, but it apparently has a share of its own dangers. Expert electricians advise it could lead to electric shock or even electrocution.

Home improvement website, The Spruce cautioned its readers against using these adapters saying that it may even cost them their lives. Builders and Contractors

“It is very common to use these adapters in homes with older outlets that don’t have three slots, but it is bad practice. In many cases, these older electrical systems do not have a dedicated ground pathway, which means that there is the potential for shock if you plug a three-prong plug into them via an adapter.”

Read more here.

Substandard Adapters

Even WikiPedia mentioned the potential trouble laying ahead from using these adapters. The entry even emphasized that the use of such can even be more dangerous when it involves a substandard one. Electricians

“Occasionally, plug and socket combinations may allow power to flow but may not meet product standards for mating force, earthing, current capacity, life expectancy, or safety. Failure to meet quality standards is even more likely when using third-party adapters or improvised user-modified connectors. Physical compatibility does not always ensure that the appliance and socket match in frequency or voltage.”

Read the rest of the entry here.

Related Electrical Repair and Installation Services:

Residential Electrical Services Check Here
GforceElectric Solar Program More Info
GforceElectrician San Marcos CA Emergency Electrician
GforceElectrician Vista CA Contractor Solar Panels
GforceElectrician Encinitas CA Contractor 24/7 Service
GforceElectrician Santee Free Estimate

The Government of Australia’s Department of Mines, Industry Regulation and Safety issued a warning to its constituents, saying that using these adapters can even be fatal.

“You may be shocked to hear that overseas plug converters supplied with appliances to make them usable in Australia could harm or kill you! There have been two local cases recently where consumers reported receiving electric shocks from power adaptors that came with appliances they’d purchased from websites.”

Read the continuation here.

Households should indeed consult an electrician when there is a permanent need for adapters so that it could be addressed safely.

Gforce Green Electric Solutions

2920 McGraw St San Diego, CA 92117

(858) 480-6559

Choosing the right bedside lamp

The post Electrician’s take on Plug Adapters appeared first on GforceElectric.

This first appeared on Linda Song's Tumblr

Electrician’s take on Plug Adapters

The Dangers of Plug Adapters

All about using Plug Adapters. (Photo Credits)

Plug adapters may be helpful around the home, but it apparently has a share of its own dangers. Expert electricians advise it could lead to electric shock or even electrocution.

Home improvement website, The Spruce cautioned its readers against using these adapters saying that it may even cost them their lives. Builders and Contractors

"It is very common to use these adapters in homes with older outlets that don't have three slots, but it is bad practice. In many cases, these older electrical systems do not have a dedicated ground pathway, which means that there is the potential for shock if you plug a three-prong plug into them via an adapter."

Read more here.

Substandard Adapters

"Occasionally, plug and socket combinations may allow power to flow but may not meet product standards for mating force, earthing, current capacity, life expectancy, or safety. Failure to meet quality standards is even more likely when using third-party adapters or improvised user-modified connectors. Physical compatibility does not always ensure that the appliance and socket match in frequency or voltage."

Read the rest of the entry here.

Related Electrical Repair and Installation Services:

Residential Electrical Services Check Here
GforceElectric Solar Program More Info
GforceElectrician San Marcos CA Emergency Electrician
GforceElectrician Vista CA Contractor Solar Panels
GforceElectrician Encinitas CA Contractor 24/7 Service
GforceElectrician Santee Free Estimate

The Government of Australia's Department of Mines, Industry Regulation and Safety issued a warning to its constituents, saying that using these adapters can even be fatal.

"You may be shocked to hear that overseas plug converters supplied with appliances to make them usable in Australia could harm or kill you! There have been two local cases recently where consumers reported receiving electric shocks from power adaptors that came with appliances they'd purchased from websites."

Read the continuation here.

Households should indeed consult an electrician when there is a permanent need for adapters so that it could be addressed safely.

Gforce Green Electric Solutions

2920 McGraw St San Diego, CA 92117

(858) 480-6559

Choosing the right bedside lamp

The post Electrician's take on Plug Adapters appeared first on GforceElectric.

Thursday, September 20, 2018

Choosing the best lighting for the bedroom

Room Lights

Bedroom lights set the mood for rest and relaxation. (Photo Credits)

Lighting design for the bedroom can have a huge impact on rest and relaxation. It can meet needs for illumination at night time, and accentuate the great features of the bedroom and its design.

It is crucial that the right lighting is picked to correctly illuminate the bedroom where it is needed. The website Decoist discussed the factors to consider in lighting the bedroom. One of the factors mentioned in the write-up is the size of the bedroom. Master Electrician

“You need to pick fixtures that emit enough light to illuminate every corner of the room in the desired fashion. The common tendency is to place way too many lights hoping that the presence of ample illumination will reflect your detailed design planning. But in reality, this does just the opposite, and the room looks too bright in one corner and dim in others. Even as sculptural additions, the pedants and chandeliers that you choose must be proportional to the size of the bedroom and surrounding decor.”

Read the rest of their lighting tips here.

Lighting Objective

Home construction and design website Houzz.com meanwhile shared tips on choosing the right lighting design for the bedroom. In their web post, they mentioned that the homeowner should always go back to their objective on how they would like to use the bedroom lights. American Lighting Association

“Think about the type of lighting you want and need. Bedside lighting is one of the first points of consideration for a bedroom. These lights can be a great excuse to add something fun and unique to accessorize your room. Table lamps on bedside tables or nightstands is a classic option that provides a good sense of symmetry and balance to a room.”

Check out the rest of the web article here.

Related Lighting Repair and Installation Services

Locate a Poway Electrician Click Here
Find a Escondido Electrician Check Info
Emergency Electrician Chula Vista 24/7 Contact
Gforce Mira Mesa Electrician Services Free Estimate
GforceElectrician Santee Free Inspection

Home improvement website TheSpruce.com mentioned several pointers in choosing the best bed side lamp for a room. In their write-up they mentioned the rule of thumb of having just one bed side lamp for one person, and two if two persons are using the bedroom. However they emphasized that if the bed is too big for one person to use, he can have two lamps in the bedroom to create a balance in terms of design.

“Getting the scale right is a balancing act—the wider your mattress, the wider the nightstand; and the wider the nightstand, the wider the lamp atop it. For a rough rule of thumb, your nightstand should measure between one-third and two-thirds the width of your mattress, and the bedside lamp should be roughly one-third the width of the nightstand when measured at the lamp’s widest point.”

Read the rest of the web post here.

Choosing the right lights for the bedroom is indeed exciting and fun!

Gforce Green Electric Solutions

2920 McGraw St San Diego, CA 92117

(858) 480-6559

Electrician’s safety tips in charging digital devices

The post Choosing the best lighting for the bedroom appeared first on GforceElectric.

This first appeared on Linda Song's Tumblr

Choosing the best lighting for the bedroom

Room Lights

Bedroom lights set the mood for rest and relaxation. (Photo Credits)

Lighting design for the bedroom can have a huge impact on rest and relaxation. It can meet needs for illumination at night time, and accentuate the great features of the bedroom and its design.

"You need to pick fixtures that emit enough light to illuminate every corner of the room in the desired fashion. The common tendency is to place way too many lights hoping that the presence of ample illumination will reflect your detailed design planning. But in reality, this does just the opposite, and the room looks too bright in one corner and dim in others. Even as sculptural additions, the pedants and chandeliers that you choose must be proportional to the size of the bedroom and surrounding decor."

Read the rest of their lighting tips here.

Lighting Objective

"Think about the type of lighting you want and need. Bedside lighting is one of the first points of consideration for a bedroom. These lights can be a great excuse to add something fun and unique to accessorize your room. Table lamps on bedside tables or nightstands is a classic option that provides a good sense of symmetry and balance to a room."

Check out the rest of the web article here.

Related Lighting Repair and Installation Services

Locate a Poway Electrician Click Here
Find a Escondido Electrician Check Info
Emergency Electrician Chula Vista 24/7 Contact
Gforce Mira Mesa Electrician Services Free Estimate
GforceElectrician Santee Free Inspection

"Getting the scale right is a balancing act—the wider your mattress, the wider the nightstand; and the wider the nightstand, the wider the lamp atop it. For a rough rule of thumb, your nightstand should measure between one-third and two-thirds the width of your mattress, and the bedside lamp should be roughly one-third the width of the nightstand when measured at the lamp's widest point."

Read the rest of the web post here.

Choosing the right lights for the bedroom is indeed exciting and fun!

Gforce Green Electric Solutions

2920 McGraw St San Diego, CA 92117

(858) 480-6559

Electrician's safety tips in charging digital devices

The post Choosing the best lighting for the bedroom appeared first on GforceElectric.

Tuesday, September 18, 2018

The truth about light dimmers

Light dimmers 101

Light dimmers can help lower utility costs. (Photo Credits)

Light dimmers can be a good type of upgrade for home lighting fixtures. Apart from allowing the user to adjust the brightness of the light, it also paves the way for more savings in terms of electricity use.

Light Manufacturer Philips shared the many advantages of using light dimmers specifically on LED lights. Builders and Contractors

"Saves energy, because less energy is used for reduced output levels. Extends life; the electronic components run cooler. This not only extends the life of LEDs but also increases the life of the phosphor coating that is used to produce white light. Helps designers create ambient lighting presets to create mood settings. Increases flexibility in usage of space. A brightly lit space for reading or an office space can turn into a presentation/conference area by dimming. Increases productivity by enabling individual control of lights in order to reduce eye strain and fatigue, or to improve concentration."

Check out the rest of their descriptions here.

Energy Savings

HomeGuides SF Gate has explained how dimmer switches can help households save on energy costs. In their write-up they mentioned that if unsure as to how to install dimmer switches, property owners should seek professional help from a licensed electrician. Electricians

"Dimmer switches put you in control of how much electricity your light fixtures use. They replace flip-type light switches, which only turn fixtures on and off; dimmers usually operate with a dial or sliding bar control. Adjusting the control adjusts the wattage output, resulting in more or less electricity and light as you need it."

Check out the rest of the write-up here.

Related Electrical Repair and Installation Services:

Residential Electrical Services Click Here
GforceElectric Solar Program More Info
GforceElectrician San Marcos CA Check Website
GforceElectrician Vista CA Contractor Free Estimate
GforceElectrician Encinitas CA Contractor 24/7 Service
GforceElectrician Santee Emergency Electrician

The website DoItYourself.com also shared important information about dimmer switches, and the many benefits of using it.

"These days with the more modern dimmer light switches, you can control the amount of lighting with a remote control. Touch dimmers give you a change of lighting just by pressing a button. You can set the mood for any room that has the adjusted dimmer light switched lighting."

The continuation of the web post can be found here.

Dimmer lights also further the lifespan of a lamp since only a fraction of its power is used up on a daily basis.

Gforce Green Electric Solutions

2920 McGraw St San Diego, CA 92117

(858) 480-6559

Signs of an electrical wiring problem

The post The truth about light dimmers appeared first on GforceElectric.

The truth about light dimmers

Light dimmers 101

Light dimmers can help lower utility costs. (Photo Credits)

Light Manufacturer Philips shared the many advantages of using light dimmers specifically on LED lights. Builders and Contractors

“Saves energy, because less energy is used for reduced output levels. Extends life; the electronic components run cooler. This not only extends the life of LEDs but also increases the life of the phosphor coating that is used to produce white light. Helps designers create ambient lighting presets to create mood settings. Increases flexibility in usage of space. A brightly lit space for reading or an office space can turn into a presentation/conference area by dimming. Increases productivity by enabling individual control of lights in order to reduce eye strain and fatigue, or to improve concentration.”

Check out the rest of their descriptions here.

Energy Savings

“Dimmer switches put you in control of how much electricity your light fixtures use. They replace flip-type light switches, which only turn fixtures on and off; dimmers usually operate with a dial or sliding bar control. Adjusting the control adjusts the wattage output, resulting in more or less electricity and light as you need it.”

Check out the rest of the write-up here.

Related Electrical Repair and Installation Services:

Residential Electrical Services Click Here
GforceElectric Solar Program More Info
GforceElectrician San Marcos CA Check Website
GforceElectrician Vista CA Contractor Free Estimate
GforceElectrician Encinitas CA Contractor 24/7 Service
GforceElectrician Santee Emergency Electrician

The website DoItYourself.com also shared important information about dimmer switches, and the many benefits of using it.

“These days with the more modern dimmer light switches, you can control the amount of lighting with a remote control. Touch dimmers give you a change of lighting just by pressing a button. You can set the mood for any room that has the adjusted dimmer light switched lighting.”

The continuation of the web post can be found here.

Dimmer lights also further the lifespan of a lamp since only a fraction of its power is used up on a daily basis.

Gforce Green Electric Solutions

2920 McGraw St San Diego, CA 92117

(858) 480-6559

Signs of an electrical wiring problem

The post The truth about light dimmers appeared first on GforceElectric.

This first appeared on Linda Song's Tumblr

Friday, August 24, 2018

Signs of an electrical wiring problem

Electrical wiring 101

Electrical wiring problems can lead to electrical fires that can put everyone’s safety at risk. (Photo Credits)

Electrical wiring problems usually occur in older homes, or those that are new but are poorly planned and constructed. It is best that these problems are addressed immediately as it can cause electrical fires which have claimed the lives and properties of a lot of Americans.

Home improvement website BobVila.com shared signs of an outdated wiring and what should be done with it. Dimming lights was one of the signs pointed out in the article. Builders and Contractors

“If the ceiling lights dim when you turn on a microwave or vacuum cleaner, you may be overloading the circuits or the wiring. To be on the safe side, check the wiring and circuit breaker to that section of your home.”

Check out the rest of the signs here.

Older home wiring problems

Older home improvement website This Old House has mentioned 10 signs of a wiring problem, how dangerous this is, and how a homeowner can deal with it. Electricians

“The panel contains more circuits than it’s rated to handle, because too many single-pole breakers (one circuit) have been replaced with tandem breakers (two circuits) in one slot. (Tandem breakers aren’t the same as high-amp double-pole breakers, which take up two slots with one circuit.) A label on each panel specifies how many circuits the panel can accommodate.”

Check out the whole list here.

Related Electrical Repair and Replacement Services:

Commercial Electrical Repair More Info https://www.gforceelectric.com/

GforceElectric Solar San Diego Experts Click Here https://www.gforceelectric.com/trusted-san-diego-solar-power-company-panel-install/

GforceElectrician Encinitas Check Website

GforceElectrician Carlsbad CA Free Estimate

GforceElectrician San Marcos CA Contractor Free Quotation

GforceElectrician Vista CA Emergency Electrician

Third-party Service Ratings Website Angie’s List meanwhile mentioned on one of its articles that an outlet that is not working, or a light switch that is non-functioning can mean wiring trouble in a home.

“Light switches or receptacles that work only intermittently give away another home electrical problem. The wiring may be loose or the device may be cracked internally. If a plug is loose in a receptacle, it can pose a problem as well. If the plug partially falls out, an unsuspecting individual could accidentally receive a shock when unplugging the cord.”

Take a look at the original article here.

The best way to deal with home wiring problems is to ensure that it will be dealt with by a licensed electrician. This way, one can ensure the resolution of the issue, prevent bigger problems and safety risks like home fires.

Gforce Green Electric Solutions

2920 McGraw St San Diego, CA 92117

(858) 480-6559

Electrician’s tips on avoiding home electrical problems

The post Signs of an electrical wiring problem appeared first on GforceElectric.

This first appeared on Linda Song's Tumblr

Signs of an electrical wiring problem

Electrical wiring 101

Electrical wiring problems can lead to electrical fires that can put everyone's safety at risk. (Photo Credits)

Home improvement website BobVila.com shared signs of an outdated wiring and what should be done with it. Dimming lights was one of the signs pointed out in the article. Builders and Contractors

"If the ceiling lights dim when you turn on a microwave or vacuum cleaner, you may be overloading the circuits or the wiring. To be on the safe side, check the wiring and circuit breaker to that section of your home."

Check out the rest of the signs here.

Older home wiring problems

Older home improvement website This Old House has mentioned 10 signs of a wiring problem, how dangerous this is, and how a homeowner can deal with it. Electricians

"The panel contains more circuits than it's rated to handle, because too many single-pole breakers (one circuit) have been replaced with tandem breakers (two circuits) in one slot. (Tandem breakers aren't the same as high-amp double-pole breakers, which take up two slots with one circuit.) A label on each panel specifies how many circuits the panel can accommodate."

Check out the whole list here.

Related Electrical Repair and Replacement Services:

Commercial Electrical Repair More Info https://www.gforceelectric.com/

GforceElectric Solar San Diego Experts Click Here https://www.gforceelectric.com/trusted-san-diego-solar-power-company-panel-install/

GforceElectrician Encinitas Check Website

GforceElectrician Carlsbad CA Free Estimate

GforceElectrician San Marcos CA Contractor Free Quotation

GforceElectrician Vista CA Emergency Electrician

Third-party Service Ratings Website Angie's List meanwhile mentioned on one of its articles that an outlet that is not working, or a light switch that is non-functioning can mean wiring trouble in a home.

"Light switches or receptacles that work only intermittently give away another home electrical problem. The wiring may be loose or the device may be cracked internally. If a plug is loose in a receptacle, it can pose a problem as well. If the plug partially falls out, an unsuspecting individual could accidentally receive a shock when unplugging the cord."

Take a look at the original article here.

Gforce Green Electric Solutions

2920 McGraw St San Diego, CA 92117

(858) 480-6559

Electrician's tips on avoiding home electrical problems

The post Signs of an electrical wiring problem appeared first on GforceElectric.

Thursday, July 26, 2018

Electrician’s safety tips in charging digital devices

Power Charging 101

Safety measures to keep in mind while charging digital devices. (Photo Credits)

Digital devices lose their meaning when they are out of power, and so most users are heavily reliant on power charging, charging pods, portable chargers and power banks. Charging however should be done with caution because it comes with safety risks.

ConsumerReports.org posted in their website safety tips on using electrical charges. In the same article, they mentioned accidents that have seriously injured digital device users who have misused their device chargers. Builders and Contractors

"Respect your phone: They seem like innocuous devices, but they can be dangerous, said Sean Cummings, the U.K. medical examiner who investigated Bull's death. So be mindful of those threats. Think twice before going into the bathroom with any device that's plugged in, Drengenberg adds. Use the right charger: Though it's not clear what type of cords or adapters were used in the Ball and Wiley accidents, a Chinese flight attendant was electrocuted in 2013 by a phone plugged into a faulty third-party charger. The incident prompted Apple to launch an education program, including a special discount for any consumer who took a third-party charger in for replacement. Drengenberg's advice: Stick to chargers approved by the manufacturer. At the very least, make sure they have a UL mark signifying that they've been put through a UL certification process."

Read more here.

The danger of using phone chargers

UK-Media Agency BBC also mentioned in one of their published articles the dangers of using digital device chargers. In their write-up they mentioned that the dangers lie on using substandard versions which cannot hold up to the electrical safety requirements set forth by the government. Electricians

"A central part of the safety concerns experts have with products bought online focuses on generic chargers – advertised as being compatible with a number of devices. Mr Gardiner says that because different devices require different levels of charge, generic chargers run the risk of putting too much energy into a device, causing the battery to overheat. Branded chargers are less likely to cause that problem because they are specifically designed for each particular device, Mr. Gardiner said. He adds that they are the most reliable in safety terms."

Take a look at the rest of the write-up here.

Related Electrical Repair and Installation Services:

Commercial Electrical Repair Click Website
GforceElectric Solar San Diego Experts More Info
GforceElectrician Encinitas Check Here
GforceElectrician Carlsbad CA Free Estimate
GforceElectrician San Marcos CA Contractor Free Inspection
GforceElectrician Vista CA Emergency Electrician

Digital Trends also has its take on the safety of using device chargers. In one of their web posts they discussed the ways consumers can stay safe whilst charging their phones, laptops, Ipads, Ipods, smart watches and the like.

"Though there is a lot of talk about carcinogens and harmful components in phones, unless your phone is in a fire or extreme scenario, these components are generally inert and safe. Beyond cutting yourself on the glass display if it cracks, there's little danger to be had. The problems we've heard of usually stem from the circuitry and the battery, which together pose two real dangers: risk of shock and risk of fire (or explosion). Fire hazard: Lithium-ion batteries are basically a slurry of electrodes and contacts that store energy. If improperly discharged, punctured, or overheated, a battery could very well catch fire or explode. Shock hazard: When it comes to the circuitry, a short in the system can cause the device to shock you, or lead to overcharging or overheating – which can also cause the battery to catch fire, or explode."

The original article can be found here.

Observing safety measures in using device chargers can help prevent injuries and accidents.

Gforce Green Electric Solutions

2920 McGraw St San Diego, CA 92117

(858) 480-6559

Electrician's advice on dealing with a powerless electrical outlet

The post Electrician's safety tips in charging digital devices appeared first on GforceElectric.

Electrician’s safety tips in charging digital devices

Power Charging 101

Safety measures to keep in mind while charging digital devices. (Photo Credits)

“Respect your phone: They seem like innocuous devices, but they can be dangerous, said Sean Cummings, the U.K. medical examiner who investigated Bull’s death. So be mindful of those threats. Think twice before going into the bathroom with any device that’s plugged in, Drengenberg adds. Use the right charger: Though it’s not clear what type of cords or adapters were used in the Ball and Wiley accidents, a Chinese flight attendant was electrocuted in 2013 by a phone plugged into a faulty third-party charger. The incident prompted Apple to launch an education program, including a special discount for any consumer who took a third-party charger in for replacement. Drengenberg’s advice: Stick to chargers approved by the manufacturer. At the very least, make sure they have a UL mark signifying that they’ve been put through a UL certification process.”

Read more here.

The danger of using phone chargers

“A central part of the safety concerns experts have with products bought online focuses on generic chargers – advertised as being compatible with a number of devices. Mr Gardiner says that because different devices require different levels of charge, generic chargers run the risk of putting too much energy into a device, causing the battery to overheat. Branded chargers are less likely to cause that problem because they are specifically designed for each particular device, Mr. Gardiner said. He adds that they are the most reliable in safety terms.”

Take a look at the rest of the write-up here.

Related Electrical Repair and Installation Services:

Commercial Electrical Repair Click Website
GforceElectric Solar San Diego Experts More Info
GforceElectrician Encinitas Check Here
GforceElectrician Carlsbad CA Free Estimate
GforceElectrician San Marcos CA Contractor Free Inspection
GforceElectrician Vista CA Emergency Electrician

“Though there is a lot of talk about carcinogens and harmful components in phones, unless your phone is in a fire or extreme scenario, these components are generally inert and safe. Beyond cutting yourself on the glass display if it cracks, there’s little danger to be had. The problems we’ve heard of usually stem from the circuitry and the battery, which together pose two real dangers: risk of shock and risk of fire (or explosion). Fire hazard: Lithium-ion batteries are basically a slurry of electrodes and contacts that store energy. If improperly discharged, punctured, or overheated, a battery could very well catch fire or explode. Shock hazard: When it comes to the circuitry, a short in the system can cause the device to shock you, or lead to overcharging or overheating – which can also cause the battery to catch fire, or explode.”

The original article can be found here.

Observing safety measures in using device chargers can help prevent injuries and accidents.

Gforce Green Electric Solutions

2920 McGraw St San Diego, CA 92117

(858) 480-6559